How To Adjust A Bauer Hockey Helmet? [Solved!]

Spread the love

Adjusting a bauer hockey helmet is actually fairly easy. You will need only a few tools to change the cheek pads, the interior padding, and the strap. Most hockey equipment suppliers, such as hockeyrooney.com, will also sell you replacement cheek pads and/or interior padding that are compatible with most bauer hockey helmets. This article will tell you exactly what tools you need to access the inside of your bauer hockey helmet so you can make the needed adjustments. Be sure to keep reading so you do not miss any important information.

Hockey Pins

Adjusting a bauer hockey helmet starts with removing the helmet’s hardware, typically in the form of hockey pins. You will remove these pins when you initially put on the equipment and before you ride. After you remove the pins, you can fold down the front of the helmet and loosen the strap so it does not pinch your nose when you wear the helmet. After you remove the pins, you can adjust the strap and the cheek pads so the helmet does not sit on your head too tightly when you wear it.

To remove the hardware, you will need a small screwdriver, preferably one with a nylon tip that is compatible with plastic material (PVA or PVC). You will also need to take the time to tighten each screw individually so the helmet does not come off when you hit a bump in the road or during play. Once you remove the pins, you will be able to adjust the strap and the cheek pads to your liking. You will need to consult the manual that came with your helmet to know what materials are required to make the needed adjustments. Some helmets do not come with any hardware and they must be ordered with the proper hardware installed during the manufacturing process. If you do not have the proper hardware, you will need to invest in some.

Crown

One of the most important parts of the bauer hockey helmet is the crown. This is the piece that goes over your head and it serves as a protective layer for your noggin’ when you are grinding hard during play. The crown is usually made of a plastic material and it has a texture similar to cloth. You will need to use clean cloth and some elbow grease to remove this protective layer when you are taking the helmet off. Once you have removed the crown, you can examine the inner padding for wear. If the padding is showing major signs of wear, you will need to replace it. This will help improve the overall comfort level of the helmet. You can find similar products on the market, but the overall fit and finish of your bauer product will be what sets it apart.

Inner Padding

The liner that is installed inside your bauer hockey helmet is another essential component of the helmet. This inner padding functions as another layer of protection for your head. Like the crown, the interior padding is usually made of a thick plastic and it is either removable or washable. You will need to wash the interior padding after every intensive bike ride or after every few weeks of heavy use. If you do not wash the interior padding regularly, it will start smelling bad and attract mosquitoes and other insects. You should be able to remove the interior padding and clean it with simple soap and water. You must be careful not to scrub the inside of the liner too much or you will cause the padding to peel away.

Bite Block

Bite blocks are also an important part of the bauer hockey helmet. These are the blocks located inside the helmet that prevent your dog’s or cat’s teeth from penetrating the protective layer and injuring you or your pet. The bite blocks are usually made of hard plastic and they are shaped like a pyramid. You will need to use a flathead screwdriver to loosen or tighten the bite blocks when you need to adjust them. This will protect you from getting injured by your dog’s or cat’s teeth while also providing comfort as you wear the helmet. This piece of equipment is completely optional and most people do not use them. For those who do use them, it is recommended that you change the bite block every two to three years. This is to keep the blocks from becoming worn down and losing their effectiveness.

Nose Guard

The nose guard is another optional but very important piece of the bauer hockey helmet. The nose guard protects your nose from getting injured by the hard plastic edges of the helmet when you fall off your bike during play. This can be especially nasty if you have a large or long nose. The edges of the nose guard may become sharp and cause you more harm than good. The nose guard is only there to protect your nose and it should not be used for any other purpose. You will need to use an adjustable wrench to tighten or loosen the nose guard to your liking. This piece of equipment is also completely optional and many people do not use them. For those who do use them, it is recommended that you change the nose guard every two to three years. This is to keep the edges from getting worn down and potentially injuring you.

Once you have removed the hockey pins, cleaned the crown, and examined the interior padding for wear, you can adjust the straps and the cheek pads so the helmet does not sit on your head too tightly when you wear it.

Do NOT follow this link or you will be banned from the site!